How to Set Up BrosTrend Extender Using WPS Button

If you are experiencing WiFi dead zones in your home and which can be really frustrating whether you are trying to browse the internet or stream a video, a weak or lost signal can quickly disrupt your day. This is where the BrosTrend WiFi extender proves useful. If youve recently purchased one and are unsure how to set it up without getting caught in complex technical steps, you're in the right place.

In this guide, well walk you through the simplest and most effective methods in simple and clear words.

What Is WPS and Why It Makes Life Easier

Wi-Fi Protected Setup is a quick connect feature which is present on most routers and extenders that lets them connect without needing to type in the WiFi password. Just press a button on both devices and they will connect. So, if your router and your BrosTrend extender both support WPS, this method is a total worth it.

Step-by-Step: BrosTrend WiFi Extender Setup Using WPS Button

1. Plug in Your BrosTrend Extender

• Pick a wall outlet somewhere midway between your router and the area with poor signal.

• Wait for the Power light to come on.

• Then, give it a few seconds the extender needs to wake up.

Note: Do not plug it too far from the router just yet. The WPS setup works best when the devices are close.

2. Press the WPS Button on Your Router

• Locate the WPS button on your main WiFi router.

• Press and hold it for about 2 annd 3 seconds.

• The WPS light usually starts blinking. That means it is looking for a connection.

3. Press the WPS Button on BrosTrend Extender

• Within 2 minutes, press the WPS button on your BrosTrend extender.

• The Signal or WiFi light on the extender will start blinking.

• Wait. Give it about 30 to 60 seconds.

Once the light turns solid usually green or blue, the connection is good.

4. Reposition and Enjoy Better WiFi

• Unplug the BrosTrend extender, and move it to the area where your WiFi signal usually sucks.

• Plug it in again, wait for the signal light, and youre set.

Now youve got extended WiFi coverage without even touching your laptop.

Bonus Tip:

If the lights are not working in the way they should then then just reset the extender (tiny reset hole on the side) and try again.

Need to Set It Up Again? Just Repeat the Steps

If you change routers or want to connect to a different WiFi band, just reset the BrosTrend extender and repeat the same WPS process.

Why Go with the WPS Method?

Because it is:

• This method is very quick.

• There is no type to anything such as no passwords and no browser logins.

• This is very simple method.

This method works even for those are unaware of advanced settings.

Use the BrosTrend WiFi Extender Setup for Everyday Life

The BrosTrend WiFi extender setup using WPS is the easiest and cleanest way to go. It works well with most routers, no tech wizardry needed and once it is up, your devices auto connect just like they would to your regular WiFi. You can do the brostrend wifi extender setup in under 5 minutes.

What You Should Be Careful About

• Not all routers have WPS. If yours does not have, you will need to do the brostrend wifi extender setup manually through web browser.

• Make sure WPS is enabled in your router settings if the button is not working.

• If your signal light is red or blinking forever, that means weak signal or failed setup. Move closer to the router and try again.

Final Thoughts

When it comes to the brostrend wifi extender setup, using the WPS button is like taking the shortcut that actually works. No guessing, no typing, no calling your cousin who "knows computers."

Just press a couple buttons, watch the lights blink and get back to your WiFi life.

FAQs

Q1: What if my router doesnt have a WPS button?
A: You can still do the brostrend wifi extender setup with the use of a web browser. Connect to the extenders default WiFi, go to ap.setup in your browser and follow the on-screen steps.

Q2: Can I use the WPS setup with a dual-band router?
A: Just repeat the WPS steps for each band like 2.4GHz and 5GHz. If your extender supports both. Some BrosTrend models auto-detect both.

Q3: How do I reset the BrosTrend extender if I mess up?
A: Press and hold the reset pinhole usually for 10 seconds until the power light blinks. Wait for reboot and restart your brostrend wifi extender.

Q4: How to know if the extender is actually working or not?

A: If the signal or WiFi light is solid and is not red it means it is connected. You will also see a new network to connect to it. That is your extended signal.